Sheet DecoFilm Soft Metallic 15"x12"
Blade – 45°
- Cut – Mirror image
- Temp – 302°-320° F
- Pressure – Firm, even
- Time – 7-8 seconds
- Peel – Cold, then cover with Teflon and repress for 3-5 seconds
- Care – Wash inside out, cold water, gentle cycle. Tumble dry low.
- Applies to: Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics (Not suitable for treated or dyed garments) Excluding Nylon
- After washing, always iron inside out. Do not iron directly on the film. We do NOT recommend layering with this material. Please note: repressing keeps material looking consistent throughout wash cycles, but will give it more of a brushed metal appearance.
- 15"x12" Sheet
Splices in rolls may cause material to conform around edges of tape, but will not affect the cutting or the finished look.
Please note: the White is translucent. The following colors are translucent in some areas and the garment color will show through: Green/Black Camo, Earthtone Camo, Grey Camo, Blue/Black Camo. The following colors are slightly translucent, but does not allow color to show through when pressed: Rainbow Oil, Leopard Silver, and Leopard Gold.
Please note: the Holoshine colors have a horizontal line going down the middle of the roll and a vertical line approx. every 29.5″. Is is part of the manufacturing process and is not a defect.